Campbell Hausfeld 3/8" Angle Drill

Campbell Hausfeld 3/8" Angle Drill Review

PL1544 Choose built to last Campbell Hausfeld air tools and accessories for all your industrial and automotive needs. This angle drill will provide you with the ability to drill, hone, ream, hole saw and wire brush just about any metal or wood materials. It features a durable Jacobs chuck for easy bit replacement and an angled head for use in confined areas. Get the job done right with Campbell Hausfeld air tools. Features: -Durable Jacobs chuck and angled head -5.9 avg. SCFM requirement at 90 PSI Specifications: -Weight: 2.36 lbs. -Warranty: 2 year limited -Dimensions: 2'' H x 4.8'' W x 8.3'' D

Milwaukee 49-22-4175 General Purpose Ice Hardened Hole Saw Kit, 15-Piece

Milwaukee 49-22-4175 General Purpose Ice Hardened Hole Saw Kit, 15-Piece Review

Milwaukee 49-22-4175 General Purpose Ice Hardened Hole Saw Kit, 15-Piece Feature

• ICE HARDENED for up to 50% longer life than the competition
• Matrix II Bi-Metal Teeth for greater durability
• Positive Rake Angle for fast cutting
• Radiused Tooth Back reduces stress on teeth
• Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal

Kit includes 11 cryogenically hardened hole saws in commonly used sizes. U.S.A. Saw Size (in.): 3/4in., 7/8in., 1in., 1 1/8in., 1 3/8in., 1 1/2in., 1 3/4in., 2in. 2 1/8in., 2 1/4in., 2 1/2in., Ice Hardened: Yes, Saw (qty.): 15

Florida Pneumatic FP-783 3/8-Inch Reversible Pistol Drill

Florida Pneumatic FP-783 3/8-Inch Reversible Pistol Drill Review

Florida Pneumatic FP-783 3/8-Inch Reversible Pistol Drill Feature

• 1,800 BPM
• Heavy duty planetary gears
• Tease trigger for control
• Trigger mounted reverse lever
• Rear exhaust and 3/8-inch Jacobs chuck

3/8" Reversible Pistol Drill 1800 RPM. Tease trigger for control. Triple planetary gears. All metal trigger. Rear exhaust. 3/8" Jacobs Chuck. Weighs 2-1/4 lbs.

Carbide Masonry Drill Bits 36000625 5/8 in

Carbide Masonry Drill Bits 36000625 5/8 in Review

Carbide masonry bits are ideal for drilling through ceramics, hard plastic, mortar, cinderblock, wood, and some brick. The cutting tip is made of tungsten carbide on a spiral steel shaft.

"Pull; Wire, CS, 3 1/2'' Drill Centers"

"Pull; Wire, CS, 3 1/2'' Drill Centers" Review

"Pull; Wire, CS, 3 1/2'' Drill Centers" Feature

• Finish-Polished Brass
• Length-3-13/16''
• Width-5/16''

"Wire Pull made by Amerock, Collection Wire Pulls, Allison theme, in a Polished Brass finish, on 3-1

#49 High Speed Steel Ground Production Import Jobber Drill Bit

#49 High Speed Steel Ground Production Import Jobber Drill Bit Review

#49 High Speed Steel Ground Production Import Jobber Drill Bit Feature

• Size: 49
• Decimal Equivalent: 0.0730"
• Overall Length: 2"

Polished flutes, a high quality general purpose drill. VME Jobber Drills are ground from solid.

Starrett 13F Inch Reading Double Square Complete, With Graduated, Bevel And Drill Grinding Blades, 6" Size

Starrett 13F Inch Reading Double Square Complete, With Graduated, Bevel And Drill Grinding Blades, 6" Size Review

Starrett 13F Inch Reading Double Square Complete, With Graduated, Bevel And Drill Grinding Blades, 6" Size Feature

• Graduation: 1/8", 1/16", 1/32", 1/64"

A drill grinding blade is beveled to 59 degree for drill grinding on one end and 41 degree (the cutting angle of countersinks for machine screws) at the other. Both ends have quick-reading 1/64" grads. and the graduation is located to measure perpendicularly to the axis of the drill. By reading the graduations, the center point can be easily and accurately located.

Precision Twist QC21CO 25/64" Parab FL Drill 135dg Spl Pt Cobalt HSS 3 3/4" Flute 5 1/8" L

Precision Twist QC21CO 25/64" Parab FL Drill 135dg Spl Pt Cobalt HSS 3 3/4" Flute 5 1/8" L Review

Parabolic flute drill bits have a large flute space for greater chip flow and improved coolant flow to the drill bit point. These factors allow bits to drill deeper and produce closer hole tolerances more quickly than regular jobber bits. A large cross section increases rigidity and strength. Bits have a reduced margin width to lessen contact between the bit and the hole sides to minimize friction and heat. A self centering 135 degree split point penetrates faster than other point styles, produces smaller chips for better chip flow, and will not skip or walk when starting a hole. The shank diameter is the same as the drill bit size. Cobalt steel material.

DEWALT DW1167 17-Piece Black-Oxide Split-Point Twist Drill Bit Assortment

DEWALT DW1167 17-Piece Black-Oxide Split-Point Twist Drill Bit Assortment Review

DEWALT DW1167 17-Piece Black-Oxide Split-Point Twist Drill Bit Assortment Feature

• 17 black oxide drill bits ranging from 1/16 inch to 1/2 inch
• 135-degree split-point tip reduces walking when starting bit
• Unique bit retention system keeps bits in place and makes different sizes easy to identify
• Set comes in Tough Case container
• Sliding rubber lock keeps case closed during transport and storage

17 Piece Black Oxide Drill Bit SetApplications:WoodMetalPlasticIncludes:1/16" Black Oxide Split Point Drill Bit (2-Pack)5/64" Black Oxide Split Point Drill Bit (2-Pack)3/32" Black Oxide Split Point Drill Bit (2-Pack)7/64" Black Oxide Split Point Drill Bit (2-pack)1/8" Black Oxide Split Point Drill Bit (2-Pack)9/64" Black Oxide Split Point Drill BitFeatures:This set contains 17 black oxide drill bits ranging from 1/16" - 1/2" and are contained in a tough case container.

IRWIN 322028 SDS-Plus 3/8 x 22 x 24 Hammer Drill Bit

IRWIN 322028 SDS-Plus 3/8 x 22 x 24 Hammer Drill Bit Review

IRWIN 322028 SDS-Plus 3/8 x 22 x 24 Hammer Drill Bit Feature

• Patented tip and flute design removes dust more efficiently.
• Chrom Vanadiam shaft
• Shot-peened, double tempered finish reduces breakage
• Copper braze material gives high heat resistance
• Fits all SDS-plus and Hilti TE-C rotary hammers

SDS-plus Standard Tip Fits all SDS-plus and Hilti TE-C rotary hammersReduced area above the flute prevents the drill bit from binding while drilling-the full usable length can be utilizedChrome vanadium shaft through-hardened to 50-53HrCPatented tip and flute design removes dust more efficiently - up to 25% faster than other bitsShot-peened, double-tempered finish reduces breakageHot isostatically pressed to extend life and resist breakageCopper braze material gives high heat resistance for reduced tip lossAll tips made to ANSI specifications 27.25 L. 1.50 W. 0.50 H.

Kreg Quick-Change Pocket-Hole Kit

Kreg Quick-Change Pocket-Hole Kit Review

Kreg Quick-Change Pocket-Hole Kit Feature

• Designed specifically for pocket-screw joinery
• No slippage and more secure hold through innovative industrial design
• Faster and easier bit changes with no chuck keys or hand tightening required
• Accepts all 1/4-inch hex bits including those with or without power groove
• Durable chuck constructed from hardened steel with an annodized aluminum collar

The Kreg Quick Change Pocket-Hole Kit is the most complete quick change system designed specifically for use with Pocket-Screw Joinery. Switch from drilling to driving in seconds with this simple kit! It provides everything you need: an innovative Quick-Change Chuck, a 6-Inch long #2 Square Driver, and the new 3/8-Inch Hex-Shank Pocket Hole Drill Bit (with depth collar and allen wrench).

Rockwell ProGrade 18-Volt Cordless Hammer Drill

Rockwell ProGrade 18-Volt Cordless Hammer Drill Review

Rockwell ProGrade 18-Volt Cordless Hammer Drill Feature

• 1/2" No-slip keyless chuck with twist locking system
• 24 clutch positions with 530in-lbs of torque
• Dual gear variable speed range
• Hammer function
• magnetic bit/screw tray

1/2", 18V, Cordless, Hammer Drill/Driver Kit, With 2 Batteries, 0-350/0-1300 RPM, 0-5600/0-20800 BPM, 24 Position Clutch, 530 IN LBS Torque, 1 Hour Charger, 2 Each 2.0AH Batteries & Carry Case.

DELTA 17-950L 16.5-Inch TwinLaser Crosshair Drill Press

DELTA 17-950L 16.5-Inch TwinLaser Crosshair Drill Press Review

DELTA 17-950L 16.5-Inch TwinLaser Crosshair Drill Press Feature

• Flexible lamp provides extra light to the work surface
• Adjustable-position, locking depth stop for accurate depth measurement and repetitive drilling
• Bright laser crosshairs clearly indicate the drill point
• 9v battery needed for crosshair lasers (battery not included)
• 14-inch by 18-inch woodworker-friendly table

Thanks to its adjustable Twin Laser pod that projects a bright laser cross hair on your work piece to indicate the point of bit contact, the DELTA 17-950L 16.5-inch Twin Laser Crosshair Drill Press lets you drill more accurately than ever before . You'll never have an inaccurate hole placement again. The large 14 x 18-inch cast iron table includes T-slots, a removable insert, and has the capacity to tilt up to 45 degrees forward so you can make angular drills. A flexible light is integrated to keep your workspace illuminated, and the table can be raised and lowered to your comfort level via a rack and pinion system. The drill press uses a 5/8-inch chuck, and offers a 3-7/8-inch quill stroke. The drill features a 1/2 HP induction motor with 12 speeds ranging from 250 to 3000 RPM, making it suitable for a variety of materials such as wood, metal, and plastic.

Milwaukee 0615-24 14.4-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit

Milwaukee 0615-24 14.4-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit Review

Milwaukee 0615-24 14.4-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit Feature

• 460 in-lbs of maximum torque
• Soft Grip Ergonomic Handle for improved comfort and control
• Patented Reversible Battery ¿ allows drill to fit in tight areas and optimizes balance while working overhead.
• Clip-Lok Belt-Clip ¿ frees up both hands for work positioning

U.S.A. Max. Torque (in.-lbs.): 460, Volts: 14.4, Speed - No Load (RPM): 0-500/0-1700, Chuck Size (in.): 1/2, Variable Speed: Yes, Side Handle: Yes, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes

MA Ford 302MD #84 Solid Carbide Circuit Board Drill

MA Ford 302MD #84 Solid Carbide Circuit Board Drill Review

These miniature drill bits are made from Industrial-grade carbide specifically designed for Circuit Board drilling applications.

7mm High Speed Steel Jobber Length Drill

7mm High Speed Steel Jobber Length Drill Review

7mm High Speed Steel Jobber Length Drill Feature

• Millimeter diameter: 7
• Decimal Equivalent (inches): 0.2756

High Speed Steel. Quality Import. Standard length ("jobber length") right hand twist drill.

Trademark Tools Hawk 75-TJ6180 Micro Size Hobby Drill Bit Set, 20-Piece

Trademark Tools Hawk 75-TJ6180 Micro Size Hobby Drill Bit Set, 20-Piece Review

Trademark Tools Hawk 75-TJ6180 Micro Size Hobby Drill Bit Set, 20-Piece Feature

• High Speed Steel Drill Bits
• Includes sizes: 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6
• 0.65, 0.7, 0.75, 0.8, 0.85, 0.9
• 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 and 1.6 mm

This incredible Trademark Tools Diamond Micro HSS Twist Drill Bit Set is ideal for precision craft and hobby work, electronics, jewelry and more! Features include: High Speed Steel Drill Bits. Includes sizes: 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 and 1.6 mm. Includes retail packaging.