Bosch TC900 Concrete Screw Drill Set

Bosch TC900 Concrete Screw Drill Set Review

Bosch TC900 Concrete Screw Drill Set Feature

• Bosch not only has a rich heritage in concrete, but is the largest manufacturer of concrete drill bits in the world
• Complete program including all sizes, the bit holder, the bit sleeve, and a complete anchoring system
• Magnetic nut setters hold the screw in place, and keep the sleeve from being damaged, extending the life of the entire system
• Bosch holds the tightest dimension to ensure low run out

With the Bosch TC900 9-Piece Masonry Screw Drill Set, all you do is insert a drill bit into the mandrel and tighten it down with the included hex wrench. The bits have a flat side to the shank so there’s no spinning once the torque kicks in, as can happen with an ordinary masonry bit. Then you insert the proper size hex driver or Phillips-head driver into the TC900 sleeve and you’re set. Once the hole is drilled, simply slide the sleeve over the bit, locking the driver in place, and proceed to drive in either a Phillips flat head or Tapcon® hex head anchor. Pull off the sleeve, exposing the bit, and repeat the process. It’s as close to fun as you’re going to get.

Features:

• Complete program including all sizes, the bit holder, the bit sleeve, and a complete anchoring system
• Magnetic nut setters hold the screw in place, and keep the sleeve from being damaged, extending the life of the entire system

What's In The Box:

• Masonry Screw Drill Bit Holder
• Allen Wrench
• Drill Bit Sleeve
• 5/32-inch Flat-Shank Carbide Drill Bit
• 3/16-inch Flat-Shank Carbide Drill Bit
• Two Magnetic Nutsetters
• Two Phillips Head Bits
• Brute Tough Snap Storage Case

Bosch CC2213 Clic-Change 1/4" Drill Bit

Bosch CC2213 Clic-Change 1/4" Drill Bit Review

Bosch CC2213 Clic-Change 1/4" Drill Bit Feature

• Change bits without re-chucking
• Switch from bit to bit quickly
• Accepts all 1/4 In. power hex shank accessories including insert bits, nutsetters and sockets
• Fits all 3/8 In. and 1/2 In. drills

- 1/4 inch drill diameter - 1/4 inch hex shank for fast bit changes and best accuracy - Split point design for heavy duty use - Split point design for heavy duty use For general purpose drilling in a wide variety of materials including wood, metal, and plastics - Compatible with Clic-Change chuck for fast, one handed bit changes

Bare-Tool Makita BHP454Z 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill (Tool Only, No Battery)

Bare-Tool Makita BHP454Z 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill (Tool Only, No Battery) Review

Bare-Tool Makita BHP454Z 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill (Tool Only, No Battery) Feature

• Makita-built 4-pole motor delivers 560 in.lbs. of Max Torque, with a variable 2-speed all metal transmission (0-400 / 0-1,700 RPM) for a wide range of applications
• Compact, ergonomic design at only 9-9/16 inches long; weighs just 4.9 lbs.
• Features such as the Shift-Lock drive system to quickly shift between modes, 2 built-in L.E.D. lights illuminate the work area, and a rugged tool belt clip
• Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles
• 3-year warranty on tool

The Makita 18V LXT Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill delivers more torque, more speed and more work to the jobsite. The versatile BHP454Z can be run as a driver-drill or as a hammer driver-drill, allowing the user to carry just one tool on the job instead of two, replacing the standard driver-drill.

View larger

BHP454Z Features POWER - Makita-built 4-pole motor delivers 560 in.lbs. of Max Torque, and handles concrete, wood and metal CONTROL - 2-speed all-metal transmission, easy-mode shift and 2 built-in L.E.D. lights COMFORT - Only 4.9 lbs. with ergonomic grip PERFORMANCE - LXT Li-Ion batteries charge in 30 minutes, run longer and deliver 2.5X more cycles Battery and charger not included

Tool Specifications Capacities Steel (1/2"), Wood (2-9/16"), Masonry (5/8") No load speed 0-400, 0-1,700 RPM Blows per minute 0-6,000, 0-25,500 BPM Maximum torque 560 in.lbs. PTI torque 360 in.lbs. Battery 18V LXT Lithium-Ion Overall length 9-9/16" Net weight 4.9 lbs. (w/battery)

Makita-Built Motor Engineered for Versatile Power
The BHP454Z features a Makita-built four-pole motor that delivers 560 in.lbs. of Max Torque and 360 in.lbs. of PTI Torque in a compact size. The BHP454Z has a Shift-Lock drive system sleeve that quickly shifts from "hammer drill" to "driver" mode. The two-speed all-metal transmission delivers 0-400 RPM in low speed and 0-1,700 RPM in high, covering a wide range of drilling and driving applications. The BHP454Z has 0-6,000 Blows Per Minute (BPM) in low speed and 0-25,500 BPM in high speed for hammer drilling into masonry and concrete.

Ergonomic Design in a Compact Size
The BHP454Z weighs just 4.9 pounds (with battery, sold separately) with a more compact design at 9-9/16 inches long and an ergonomic shape that fits like a glove for reduced operator fatigue. The BHP454Z is also equipped with a built in L.E.D. light that illuminates the work area for more efficient work.

Versatile Design for a Range of Applications
The BHP454Z's percussive hammer and driver-drill capabilities are a perfect fit for the pro that wants more features. This tool is perfect for a range of applications requiring percussive hammer-drilling, include fastening medium sized anchors, drilling into masonry, and even setting small sized anchors into concrete. The BHP454Z will handle a full range of drilling and driving tasks into wood and other materials, and can be utilized in many different areas such as HVAC, woodworking, plumbing, electrical, and more. The combination of high speed and high torque makes the BHP454Z ideal for any pro contractor who requires a best-in-class engineered cordless hammer driver-drill. The BHP454Z is just another example of Makita's commitment to innovative technology and best in class engineering.

About Makita's 18V LXT Lithium-Ion Cordless Tool Series
As one of the pioneers driving the cordless tool revolution, Makita changed the game with its breakthrough 18V LXT Lithium-Ion Cordless Series. Three years after its debut, Makita's LXT Series has grown from seven to over 35 tools, providing a wide range of cordless solutions for professional tradesmen. Makita also added 18V Compact Lithium-Ion for cordless power in a more compact size. Makita's 18V Lithium-Ion batteries and ENERGY STAR rated Optimum Charging System provide several benefits over old battery technology. When compared to traditional 18V Ni-Cd batteries, Makita's 18V Lithium-Ion batteries have 40% less weight, longer run time, and five-times lower self-discharge to keep cells active and ready to use at any time.

Makita's 18V Lithium-Ion battery delivers 2,000 cycles--2.5X more than Ni-Cd. In addition, built-in shock absorbing features help protect the battery, and sixteen firm-holding contact terminals deliver constant high power. During the charging process, a built-in memory chip in the battery communicates with the Optimum Charger for a more efficient charge, extending the battery life. Makita's Optimum Charger is also faster: it will charge an 18V LXT Lithium-Ion battery in just 30 minutes, and an 18V Compact Lithium-Ion battery in only 15 minutes. Makita also offers a Rapid Automotive Charger for 18V LXT and 18V Compact Lithium-Ion batteries that plugs into 12V DC sockets equipped in most automobiles and trucks for added mobility. Makita's growing line of LXT cordless tool solutions features a wide range of industrial-quality power tools, including driver-drills, impact drivers, impact wrenches, saws, grinders, screwguns, rotary hammers, and more. The LXT Series also offers a jobsite radio, rechargeable flashlights, and several different combo kits.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty
Every Makita Lithium-Ion tool is backed by Makita's 3-Year Warranty that covers repair due to defects in materials or workmanship up to three years from the date of original purchase. Makita Lithium-Ion batteries and chargers have a limited 1-year warranty. Please see makitatools.com for complete details.

What's in the Box
Makita BHP454Z 18V LXT Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill (tool only).

Other Makita Lithium-Ion Series

More 18V Lithium-Ion Tools from Makita See the entire 18V Lithium-Ion Lineup

Driver-Drills Impact Drivers Impact Wrenches BHP454 BDF451 BDF452 BDA350 BTD144 BTW450 BTW251 BTL063

Concrete Metalworking Combo Kits BHR240 BCS550 BPB180 LXT1500 15-Tool Kit LXT1200 12-Tool Kit LXT902 9-Tool Kit

2 Trigger forward built in LED lights illuminates the work area. Ergonomics shape fits like a glove with even pressure and easy control. Soft grip handle provides increased comfort on the job. 6 torque settings; delivers up to 440 in./lbs. of torque. Two speed gearing for more efficiency. All metal gears for more efficient power transmission. Includes Makita BHP454Z ( Bare tool - No Battery - No Charger).

Tooluxe 3-Piece 24-Volt Cordless Drill, Air Inflator and Flashlighht Set, Nylon Carrying Bag Included

Tooluxe 3-Piece 24-Volt Cordless Drill, Air Inflator and Flashlighht Set, Nylon Carrying Bag Included Review

Tooluxe 3-Piece 24-Volt Cordless Drill, Air Inflator and Flashlighht Set, Nylon Carrying Bag Included Feature

• 3-piece 24-volt cordless tool set by Tooluxe, comes with a cordless drill, air inflator & flashlight
• Battery is interchangeable with the 3 different tools
• 24V cordless drill: build-in laser level, 1/2" chuck with 2 speed setting: 0-1000 rpm, reversible
• 24V air inflator: max pressure at 125 PSI, Scale range: 0-140 PSI, with a 20-inches long air hose
• Package also comes with one 3-5 hour Ni-Cd battery charger and a nylon carrying bag

3-piece 24-volt cordless kit by Toolxue. Package comes with a cordless drill, air inflator, and flashlight. Package comes with one interchangeable 24-volt Ni-Cd battery and one 3-5 hour battery charger. One 24 cordless laser drill: Build-in laser level, 1/2" chuck 2 speed setting: Low: 0 - 400 rpm High: 0 - 1050 rpm 24 + 1 torque setting Auto stop, reversible. One 24 V cordless air inflator: Max pressure: 125 psi Scale range: 0 - 140 psi Air hose: 20". One 24 V cordless flashlight. Accessory: screwdriver bits, drill bits, inflator needle. One 3 to 5 hours charge Ni-cd battery and charger. Package comes with a durable nylon carrying bag.

Bosch HCFC2064 3/8-Inch by 10-Inch by 12-Inch SDS Plus X5L Drill Bit

Bosch HCFC2064 3/8-Inch by 10-Inch by 12-Inch SDS Plus X5L Drill Bit Review

Bosch HCFC2064 3/8-Inch by 10-Inch by 12-Inch SDS Plus X5L Drill Bit Feature

• 4X life in rebar and 40% more life in concrete than competitive full head carbide bits
• Faster drilling speed versus 2 cutter
• Less Carbide Wear than 2 cutter means an end user is more productive with a single bit
• Solid tungsten carbide head with four cutter geometry - extraordinary lifetime and high drilling speed in concrete and concrete with rebar - No jamming when hitting rebar - Optimized for heavy duty rotary hammers
• Stress Optimized flute surface and geometry - For fast dust removal, high power transmission, and optimized stress behavior, no overstraining.

Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.

3 Piece High Speed Steel Step Drill Bit Set

3 Piece High Speed Steel Step Drill Bit Set Review

21-ST123 Features: -High Speed Steel Step Drill Bit Set. -Constructed of high speed steel with heat treatment. -Drill round holes in most metals, plastic, wood and etc. -Self-starting tips will not skid. -No need for center punching or pilot drill. -For using electric drills and drill presses. -Hole Size: 1/8'' - 3/4''. -Number of holes: 3-Picece. -Increments: 1/32'', 1/16''. -Shank Size: 1/4'', 3/8''.

Shop Fox D2960 Right Angle Drill Attachment

Shop Fox D2960 Right Angle Drill Attachment Review

Shop Fox D2960 Right Angle Drill Attachment Feature

• Includes side handle and 3/8-Inch keyed chuck

Increase the versatility of your power drill by drill by drilling into tight places with this 90 DEG Angle Drilling Attachment. 3/8" shaft mounts right into your drill chuck and includes side handle and 3/8" keyed chuck.